Heterocyclic Building Blocks-isoxazole

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.78967-07-4,Mofezolac,as a common compound, the synthetic route is as follows.,78967-07-4

To a stirred solution of mofezolac (500 mg, 1.47 mmol) in dry CH2Cl2 (25 mL) , kept at 0C by an ice-bath, HOBt monohydrate (253 mg, 1.48 mmol) and EDC hydrochloride (303 mg, 1.58 mmol) were added. Separately a stirred solution of methyl 11-aminoundecanoate hydrochloride (370 mg, 1.38 mmol) in dry CH2Cl2 (13 mL) was mixed with DIEA (0.45 mL, 2.6 mmol) at room temperature. After 2h, this solution was dropwise added to the reaction mixture and stirred overnight at room temperature. Then, sat. aq. NaHCO3 was added and the aqueous solution extracted three times with EtOAc. The combined organic layers were dried over anhydrous Na2SO4, and the solvent distilled under reduced pressure. Column chromatography (silica gel; CHCls/MeOH = 5:5) of the crude residue afforded the product as a white solid (573 mg, 72% yield). NMR (300 MHz, CDCl3, delta) : 7.41- 7.26 (m, 2H aromatic protons) ; 7.25-7.13 (m, 2H aromatic protons) ; 6.93-6.71 (m, 4H aromatic protons), 5.80 (bs, 1H, exchanges with D20) , 3.82 (s, 3H, OC) , 3.80 ( s, 3H, OCH3) , 3.67 (s, 2H, CH2) , 3.65 (s, 3H, COOC) , 3.23- 3.21 (m, 2H, NHC), 2.31-2.26 (t, 2H, CCO) , 1.62-1.57 (m, 2H, CCH2CO) , 1.49-1.45 (m, 2H, CCH2NH) ; 1.25-1.10 (m, 12H, CH2) . ESI/MS m/z: C3iH4oN206 (M + Na)+: 559.

78967-07-4 Mofezolac 4237, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; UNIVERSITA’ DEGLI STUDI DI BARI “ALDO MORO”; SCILIMATI, Antonio; PERRONE, Maria Grazia; VITALE, Paola; (114 pag.)WO2017/187352; (2017); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

3209-71-0, Isoxazole-3-carboxylic Acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

HOBt (4.5 g, 29.4 mmol) and EDCI (5.4 g, 28.2 mmol) were added to solution of isoxazole-3-carboxylic acid (2 1, 3 g, 26.5 mmol) and N,O-dimethylhydroxylamine (0205) hydrochloride (2.7 g, 27.7 mmol) in DMF (5 ml) and DCM (7ml). 4-methylmorpholine (3 ml, 27.3 mmol) was added, then the mixture was stirred overnight. It was extracted with ether (300 ml) and brine (100 ml), the organic layer was separated, it was washed with brine, dried over Na2S04, then filtered and the solvent was evaporated. The residue was purified by (0206) chromatography (Redisep 40 g column) eluting with 1/1 EtOAc/Hexanes yielding N-methoxy- N-methylisoxazole-3-carboxamide (2_2). LCMS (ESI) calc?d for C6H8N203 [M+H]+: 157.1, found: 157.1

3209-71-0, The synthetic route of 3209-71-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; LIU, Jian; CLAUSEN, Dane James; YU, Wensheng; KELLY, Joseph, M.; KIM, Hyunjin, M.; KOZLOWSKI, Joseph, A.; (202 pag.)WO2020/28150; (2020); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

21169-71-1, As the paragraph descriping shows that 21169-71-1 is playing an increasingly important role.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

57684-71-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.57684-71-6,3-(Chloromethyl)isoxazole,as a common compound, the synthetic route is as follows.

To a solution of (S)-2-(3-methyl-2,6-dioxo-2,3-dihydro-1H-purin-7(6H)-yl)-N-(6′- (trifluoromethyl)-[2,3′-bipyridin]-6-yl)propanamide (15 mg, 0.033 mmol) and POTASSIUM CARBONATE(9 mg, 0.065 mmol) in DMF (1 mL) was added 3-(chloromethyl)isoxazole (3.7 mg, 0.049 mmol). The mixture was stirred at rt overnight. The mixture was diluted with EA and washed with water, saturated aqueous NH4Cl solution and brine, dried over Na2SO4, and evaporated. The residue was purified by silica gel column chromatography (0-2% MeOH/DCM) to give the product (S)-2-(1-(isoxazol-3-ylmethyl)-3-methyl-2,6-dioxo-2,3-dihydro-1H-purin- 7(6H)-yl)-N-(6′-(trifluoromethyl)-[2,3′-bipyridin]-6-yl)propanamide (16.5 mg, 92% yield) as a white solid.1H NMR (400 MHz, DMSO-D6) delta 11.20 (s, 1H), 9.43 (s, 1H), 8.78 (s, 1H), 8.68 (d, J = 1.8 Hz, 1H), 8.39 (s, 1H), 7.89-8.05 (m, 4H), 6.45 (s, 1H), 5.82 (m, 1H), 5.09 (s, 2H), 3.47(s, 3H), 1.87 (d, J = 7.3 Hz, 3H). MH+ 541.

57684-71-6 3-(Chloromethyl)isoxazole 4913025, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; HYDRA BIOSCIENCES, INC.; CHENARD, Bertand, L.; WU, Xinyuan; (351 pag.)WO2016/44792; (2016); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

13999-39-8, 3-Amino-4,5-dimethylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

STEP07: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (10.5 gm, 0.053 mol) in (15ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (4 gm, 0.035 mol) and dimethylaminopyridine (500 mg) in pyridine (20 ml) at 0 C. After the completion of the addition the temperature of the reaction mixture was slowly raised to room temperature and stirred for 6 hours. The reaction mixture was then concentrated under vacuum, the residue thus obtained was acidified using IN hydrochloric acid followed by extraction with methylene chloride (100 ml x2). The combined extracts were washed with water and brine solution. Organic layer was then dried over sodium sulphate and concentrated to give 4.0 gm of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl- isoxazol-3yl) amide as brown colored solid.; STEP09: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (10.5 gm, 0.053 mol) in (15ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (4 gm, 0.035 mol) and dimethylaminopyridine (500 mg) in pyridine (20 ml) at 0 C. After the completion of the addition the temperature of the reaction mixture was slowly raised to s room temperature and stirred for 6 hours. The reaction mixture was then concentrated under vacuum, the residue thus obtained was acidified using IN hydrochloric acid followed by extraction with methylene chloride (100 ml x2). The combined extracts were washed with water and brine solution. Organic layer was then dried over sodium sulphate and concentrated to give 4.0 gm of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl- o isoxazol-3yl) amide as brown colored solid.; STEP05: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (10.5 gm, 0.053 mol) in (15ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (4 gm, 0.035 mol) and dimethylaminopyridine (500 mg) in pyridine (20 ml) at 0 C. After the completion of the addition the temperature of the reaction mixture was slowly raised to room temperature and stirred for 6 hours. The reaction mixture was then concentrated under vacuum, the residue thus obtained was acidified using IN hydrochloric acid followed by extraction with methylene chloride (100 ml x2). The combined extracts were washed with water and brine solution. Organic layer was then dried over sodium sulphate and concentrated to give 4.0 gm of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl- isoxazol-3yl) amide as brown colored solid.; STEPIl: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (l.Ogm, 0.081mol) in (25ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (6.2gm, 0.055mol ) and dimethylaminopyridine (500 mg) in pyridine (40 ml) at 0 C. After the completion of the addition the temperature of the reaction mixture was slowly raised to room temperature and stirred it for 6 hours. The reaction mixture was then concentrated under vacuum, the residue thus obtained was acidified using IN hydrochloric acid followed by extraction with methylene chloride (100 ml x2). The combined extracts were washed with water and brine solution. Organic layer was then dried over sodium sulphate and concentrated to give 18 gm of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl- isoxazol-3yl) amide as brown colored solid.; STEP05: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (16.0gm, 0.08 lmol) in (25ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (6.2gm, 0.055mol ) and dimethylaminopyridine (500 mg) in pyridine (40 ml) at 0 C. After the completion of the addition the temperature of the reaction mixture was slowly raised to room temperature and stirred it for 6 hours. The reaction mixture was then concentrated under vacuum, the residue thus obtained was acidified using IN hydrochloric acid followed by extraction with methylene chloride (100 ml x2). The combined extracts were washed with water and brine solution. Organic layer was then dried over sodium sulphate and concentrated to give 18 gm of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethyl- isoxazol-3yl) amide as brown colored solid.; STEP05: Synthesis of 5-methyl-thiophene-2-sulphonic acid (4, 5-dimethgammal-isoxazol-3yl) amide.; The solution of 5-Methyl thiophene-2-sulphonyl chloride (l.Ogm, 0.08 lmol) in (25ml) methylene chloride was added to the solution of 3-amino-4, 5-dimethylisoxazole (6.2gm, 0.055mol ) and dimethylaminopyridine (500 mg) in pyridine (40 ml) at 0 C. After the completion of the addition the temperature of the reaction mi…

13999-39-8, The synthetic route of 13999-39-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TORRENT PHARMACEUTICALS LTD; WO2007/100295; (2007); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

14441-90-8, 5-Phenylisoxazole-3-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

into a 50-mL round-bottom flask, was placed a solution of methyl 3- aminocyclopentane-l-carboxylate (500 mg, 3.49 mmol, 1.00 eq.) in dichloromethane (10 mL). To the solution were added HATU (1.59 g, 4.18 mmol, 1.20 eq.), DIEA (1.6 g, 12.38 mmol, 3.50 eq.) and 5-phenylisoxazole-3-carboxylic acid (790 mg, 4.18 mmol, 1.20 eq.). The resulting solution was stirred for 2 hours at room temperature. The reaction was then quenched by the addition of water. The resulting solution was extracted with ethyl acetate and the combined organic layers were dried over anhydrous sodium sulfate and concentrated under vacuum. This resulted in 0.925 g (84%) of methyl 3-(5-phenylisoxazole-3- amido)cyclopentane-l-carboxylate as a light yellow solid. LC-MS (ES, m/z) [M+H]+ = 315.1, 14441-90-8

As the paragraph descriping shows that 14441-90-8 is playing an increasingly important role.

Reference£º
Patent; PROTEOSTASIS THERAPEUTICS, INC.; LEE, Po-shun; (180 pag.)WO2017/40606; (2017); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

4369-55-5, 5-Amino-3-phenylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of (R)-2-(3-bromo-4-cyanophenylamino)-4-methylpentanamide (120 mg, 0.387 mmol), 5-amino-3-methylisoxazole (60 mg, 0.612 mmol), sodium phenoxide trihydrate (100 mg, 0.588 mmol), xantphos (25 mg, 0.043 mmol) and Pd2(dba)3 (20 mg, 0.021 mmol) in dioxane (3 mL) was degassed with Ar, then was heated at 170 C for 15 min by microwave. It was concentrated in vacuo. The residue was purified by HPLC to give (R)-2-(4-cyano-3-(3- methylisoxazol-5 -ylamino)phenylamino)-4-methylpentanamide (20 mg)

4369-55-5, 4369-55-5 5-Amino-3-phenylisoxazole 261201, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong, J.; SONG, Yonghong; XU, Qing; KANE, Brian; BAUER, Shawn, M.; PANDEY, Anjali; WO2012/61418; (2012); A2;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

1018297-63-6, (3-(4-Fluorophenyl)-5-methylisoxazol-4-yl)methanol is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 91 6-[3-(4-Fluoro-phenyl)-5-methyl-isoxazol-4-ylmethoxy]-[1,2,4]triazolo[4,3-b]pyridazine As described for example 90, [3-(4-fluoro-phenyl)-5-methyl-isoxazol-4-yl]-methanol (100 mg, 0.53 mmol) was converted, instead of [3-(3-fluoro-phenyl)-5-methyl-isoxazol-4-yl]-methanol, to the title compound (99 mg, 63%) which was obtained as a white solid. MS: m/e=326.1 [M+H]-., 1018297-63-6

The synthetic route of 1018297-63-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Buettelmann, Bernd; Jakob-Roetne, Roland; Knust, Henner; Thomas, Andrew; US2009/143385; (2009); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

13999-39-8, 3-Amino-4,5-dimethylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 10-mL RBF was charged with (P)-perfluorophenyl perfluorophenyl 1-(4-bromo-5-fluoro-2-methoxyphenyl)-2-oxo-1,2-dihydroquinoline-6-sulfonate (58 mg, 0.098 mmol) and 4,5-dimethylisoxazol-3-amine (16.4 mg, 0.146 mmol) then purged with nitrogen. Tetrahydrofuran (732 muL) and dimethyl sulfoxide (244 muL) were introduced, and the resultant brown solution cooled to 0 C. A solution of lithium bis(trimethylsilyl)amide in tetrahydrofuran (1.0 M, 215 muL, 0.215 mmol) was added dropwise via syringe to the stirred reaction mixture over 3 min. After 15 min, 1.0 N HCl (5 mL) was introduced and the resultant reaction mixture was allowed to warm to ambient temperature. The mixture was diluted with and EtOAc (10 mL) and the layers were separated, and the aqueous layer was further extracted with EtOAc (3*10 mL). The combined organic layers were then washed with brine (20 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated under reduced pressure to furnish a yellow oil, which was dissolved in DMSO (2 mL) filtered through a 0.2 micron filter and purified by reverse-phase HPLC (Waters XBridge Prep Shield RP18 10 mum OBD 19*100 mm) gradient, 20 to 75% MeCN in water (containing 0.1% trifluoroacetic acid as an additive), flow rate 40 mL/min to afford (P)-1-(4-bromo-5-fluoro-2-methoxyphenyl)-N-(4,5-dimethyl-3-isoxazolyl)-2-oxo-1,2-dihydro-6-quinolinesulfonamide (29.0 mg, 0.056 mmol, 56.9% yield) as a white amorphous solid. 1 H NMR (500 MHz, DMSO-d6) delta ppm 10.79 (br. s., 1 H) 8.32 (d, J=2.01 Hz, 1 H) 8.23 (d, J=9.67 Hz, 1 H) 7.85 (dd, J=8.99, 2.04 Hz, 1 H) 7.67 (d, J=6.23 Hz, 1 H) 7.62 (d, J=8.56 Hz, 1 H) 6.86 (d, J=8.95 Hz, 1 H) 6.79 (d, J=9.67 Hz, 1 H) 3.70 (s, 3 H) 2.21 (s, 3 H) 1.80 (s, 3 H). m/z (ESI) 522.0 (M+H)+., 13999-39-8

13999-39-8 3-Amino-4,5-dimethylisoxazole 84148, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; Amgen Inc.; Weiss, Matthew; Boezio, Alessandro; Boezio, Christiane; Butler, John R.; Chu-Moyer, Margaret Yuhua; Dimauro, Erin F.; Dineen, Thomas; Graceffa, Russell; Guzman-Perez, Angel; Huang, Hongbing; Kreiman, Charles; La, Daniel; Marx, Isaac E.; Milgrim, Benjamin Charles; Nguyen, Hanh Nho; Peterson, Emily; Romero, Karina; Sparling, Brian; US9212182; (2015); B2;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

62348-13-4, Isoxazole-5-carbonyl chloride is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,62348-13-4

REFERENCE EXAMPLE 3 SYNTHESIS OF 6-[4-(ISOXAZOLE-5-CARBONYL)PIPERAZIN-1-YL]PYRIDAZINE-3-CARBOXYLIC ACID (3-METHYLBUTYL)AMIDE To a stirred solution of 6-piperazin-1-yl-pyridazine-3-carboxylic acid (3-methylbutyl)amide (277 mg, 1 mmol) in dichloromethane (15 mL) was added isoxazole-5-carbonyl chloride (1.0 mmol) as a dichloromethane solution in the presence of triethylamine (0.4 mL) at ambient temperature. After 1 hour the mixture was evaporated and the residue was subjected to column chromatography. Final product was isolated as a solid (0.107 g, yield 29%). 1H NMR (300 MHz, CDCl3) delta 8.34, 8.05, 7.83, 7.00, 6.86, 3.90-3.84, 3.51-3.45, 1.75-1.62, 1.53-1.46, 0.92. MS (ES+) m/z 373.3 (M+1).

62348-13-4 Isoxazole-5-carbonyl chloride 2736707, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; Xenon Pharmaceuticals Inc.; Abreo, Melwyn; Chafev, Mikhail; Chakka, Nagasree; Chowdhury, Sultan; Fu, Jian-Min; Gschwend, Heinz, W.; Holladay, Mark, W.; Hou, Duanjie; Kamboj, Rajender; Kodumuru, Vishnumurthy; Li, Wenbao; Liu, Shifeng; Raina, Vandna; Sun, Sengen; Sun, Shaoyi; Sviridov, Serguei; Tu, Chi; Winther, Michael, D.; Zhang, Zaihui; (94 pag.)EP2316827; (2016); B1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem