Tag: 21169-71-1

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

21169-71-1, The synthetic route of 21169-71-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

21169-71-1, As the paragraph descriping shows that 21169-71-1 is playing an increasingly important role.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21169-71-1, Isoxazole-5-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

21169-71-1, 21169-71-1 Isoxazole-5-carboxylic acid 2060599, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%)., 21169-71-1

21169-71-1 Isoxazole-5-carboxylic acid 2060599, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21169-71-1, Isoxazole-5-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,21169-71-1

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

The synthetic route of 21169-71-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21169-71-1, Isoxazole-5-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,21169-71-1

Procedure S: Ethyl 2-(isoxazol-5-yl)-2-oxoacetate; To a solution of 4.7 g (40.7 mmol, 1.0 eq.) of isoxazole-5-carboxylic acid in 70 mL of anhydrous THF at -78 C under an argon atmosphere was added 4.5 mL (40.7 mmol, 1.0 eq.) of iV-methylmorpholine followed by 5.3 mL (43 mmol, 1.05 eq.) of isobutyl chloroformate. The mixture stirred at -78 C for 20 min. The mixture was filtered and the filtrate was allowed to warm to 0 C and excess diazomethane added slowly. The mixture was allowed to warm to room temperature and stirred for 16 h. A solution of 25 mL of 33% HBr in acetic acid was added and the mixture stirred at room temperature for 10 min. The mixture was diluted with 400 mL of EtOAc and washed with 10% citric acid followed by sat. NaHCO3 and sat. brine. The organic phase was dried (Na2SO4) and the solvent removed in vacuo. The residue was purified by flash chromatography to provide 5.2 g of 2-bromo-l-(isoxazol-5- yl)ethanone as a white solid. The 2-bromo-l-(isoxazol-5-yl)ethanone was redissolved in 300 mL of ethanol and 3.3 g (30 mmol) of selenium dioxide added. The mixture heated at 100 C for 16 h. The mixture was allowed to cool to room temperature and filtered. The solvent was removed in vacuo and the residue partitioned between EtOAc and sat. NaHCO3. The layers were separated and the aqueous phase extracted with EtOAc. The combined organic extracts were washed with sat. brine, dried (Na2SO4) and the solvent removed in vacuo. The residue was purified by flash chromatography to provide 1.8 g of ethyl 2-(isoxazol-5-yl)-2- oxoacetate. deltaH (300 MHz, CDCl3) 1.43 (t, 3H), 4.47 (q, 2H), 7.40 (d, IH), 8.45 (d, IH).

The synthetic route of 21169-71-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LIGAND PHARMACEUTICALS INC.; COLE, Andrew; MCGUINNESS, Brian, F.; SHAO, Yuefei; DONG, Guizhen; HENDERSON, Ian; WO2010/8775; (2010); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21169-71-1, Isoxazole-5-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 55.2-(6-Fluoro- 1 -methyl- 1 H-indazol-3 -yl)-5H-pyrrolo [2,3 -b]pyrazine-7-carboxylic acid (1 – isoxazol-5 – l-ethyl)-amideIn a round-bottomed flask, isoxazole-5-carboxylic acid (1.0 g, 8.84 mmol) was dissolved in THF (35 ml). The solution was cooled to 0C and triethylamine (1.4 ml, 10.0 mmol) was added followed by ethyl chloroformate (0.94 ml, 9.8 mmol). A thick precipitate was formed upon the addition of the latter. The suspension was stirred at 0C for 15 min then a solution of sodium borohydride (1.00 g, 26.5 mmol) in water (14 ml) was added portionwise via pipet. Vigorous gas evolution was observed. The reaction mixture was stirred at 0C for 1 h then diluted with water and saturated aqueous NH4C1 and extracted with dichloromethane (3x). The organic layers were combined, dried over sodium sulfate, filtered and concentrated. The residue waschromato graphed over silica gel with EtOAc/hexanes (gradient 0-50% EtOAc) to afford 513 mg (59%) of isoxazol-5-yl-methanol as a colorless oil. 1H NMR (CDC13, 300 MHz): ? (ppm) 8.23 (d, J=1.9 Hz, 1H), 6.26 – 6.30 (m, 1H), 4.82 (s, 2H), 2.13 (br. s., 1H).

As the paragraph descriping shows that 21169-71-1 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; CHEN, Shaoqing; DE VICENTE FIDALGO, Javier; HAMILTON, Matthew Michael; HERMANN, Johannes Cornelius; KENNEDY-SMITH, Joshua; LI, Hongju; LOVEY, Allen John; LUCAS, Matthew C.; LUK, Kin-Chun Thomas; LYNCH, Stephen M.; O’YANG, Counde; PADILLA, Fernando; SCHOENFELD, Ryan Craig; SIDDURI, Achyutharao; SOTH, Michael; WANG, Ce; WOVKULICH, Peter Michael; ZHANG, Xiaohu; WO2013/30138; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21169-71-1, Isoxazole-5-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example Llsoxazole-5-carboxylic acid [2-(2-o-tolyl-chroman-6-yloxy)-thiazol-5-ylmethyl]-amideTo a solution of [2-(2-o-tolyl-chroman-6-yloxy)-thiazol-5-ylmethyl]amine (150 mg, 0.43 mmol) in DMF (2 ml), 1 -(3-dimethylaminopropyl)-3-ethylcarbodiimidehydrochloride (1 14 mg, 0.60 mmol, 1 .4 eq), 1 -hydroxy-benzotriazole (81 mg, 0.60 mmol, 1 .4 eq) and N-methylmorpholine (107 mg, 1 .07 mmol, 2.5 eq) and isoxazole-5- carboxylic acid (72 mg, 0.64 mmol, 1 .5 eq) were added. The mixture was stirred for 16 h, then diluted with water, and the aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with a diluted aqueous solution of sodium carbonate and brine, dried over sodium sulfate and filtered, and the solvent was removed under reduced pressure. The crude product was purified by column chromatography (silica gel, ethyl acetate/methanol gradient), lsoxazole-5-carboxylic acid [2-(2-o-tolyl-chroman-6-yloxy)-thiazol-5-ylmethyl]-amide (1 12 mg, 59%) was obtained as a white solid.

21169-71-1 Isoxazole-5-carboxylic acid 2060599, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; SANOFI; CZECHTIZKY, Werngard; WESTON, John; RACKELMANN, Nils; PODESCHWA, Michael; ARNDT, Petra; WIRTH, Klaus; GOEGELEIN, Heinz; RITZELER, Olaf; KRAFT, Volker; BELLEVERGUE, Patrice; MCCORT, Gary; WO2013/37388; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

To a solution of (R)-methyl l-((l-(tert-butoxycarbonyl)pyrrolidin-2-yl)methyl)-2-imino- 2,3-dihydro-lH-benzo[d]imidazole-5-carboxylate (1 120 mg, 2.99 mmol) (Intermediate 13, Step 3), isoxazole-5-carboxylic acid (507.3 mg, 4.49 mmol), and DIPEA (1.03 mL, 5.9 8mmol) in DMF (6 mL)) was added HATU (1705 mg, 4.49 mmol). The resultant mixture was stirred at rt for 2 hours. The reaction mixture was evaporated, then the crude mixture was diluted with DCM and washed with brine. The organic layers were separated and dried with MgS04, filtered and concentrated to crude oil. This crude oil was purified by chromatography to obtain 1380 mg of (R)-methyl l-((l-(tert-butoxycarbonyl)pyrrolidin-2-yl)methyl)-2-(isoxazole-5-carboxamido)-lH- benzo[d]imidazole-5-carboxylate.

21169-71-1 Isoxazole-5-carboxylic acid 2060599, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; PRINCIPIA BIOPHARMA INC.; BRAMELD, Kenneth, A.; OWENS, Tim, A.; WO2014/36016; (2014); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21169-71-1,Isoxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: Compounds were synthesized in solution phase using Boc-protected amino acids on 100-200mg scale. Firstly, the amino acid (1.2-1.5equiv) was activated with HBTU (1.5equiv) and DIPEA (1.5equiv) as 0.2-0.5M solution in DMF for 10min. Then the solution was added to an amino group bearing C-terminal moiety (R1R2NH) and the mixture was stirred for a minimum of 1h at room temperature. The reaction mixture was diluted with EtOAc and washed with saturated NaHCO3 (2¡Á). The organic extracts were dried over MgSO4, filtered and evaporated in vacuo. The crude product was then treated with 20% TFA in DCM and stirred for 1-2h to remove the Boc group. TFA was removed by evaporating the reaction mixture under a stream of N2. The residue was dissolved in DCM and washed with saturated NaHCO3 (2¡Á). DCM phase was dried with MgSO4, filtered and evaporated in vacuo. Subsequent N-Boc-amino acids and amines were sequentially coupled under the same conditions. Each coupling reaction was monitored by ESMS, with most reactions going to completion overnight. All final compounds were purified on rpHPLC (97% by analytical HPLC) and fully characterized by NMR and HRMS (yields between 30% and 40%).

As the paragraph descriping shows that 21169-71-1 is playing an increasingly important role.

Reference£º
Article; Yau, Mei-Kwan; Liu, Ligong; Lim, Junxian; Lohman, Rink-Jan; Cotterell, Adam J.; Suen, Jacky Y.; Vesey, David A.; Reid, Robert C.; Fairlie, David P.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 3; (2016); p. 986 – 991;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem