Day: November 3, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.35166-33-7,3-Hydroxymethyl-5-methylisoxazole,as a common compound, the synthetic route is as follows.

Example 22 3- [ (4-METHOXYPHENYL) AMINO]-1- [ (5-METHYLISOXAZOL-3-YL) METHYL]-4-PHENYL-LH-PYRROLE- 2,5-dione To a solution of 3- [ (4-methoxyphenyl) amino]-4-phenyl-lH-pyrrole-2, 5-dione (0.17 mmol, 50 mg), 5-methylisoxazole-3-methanol (0.19 mmol, 21 mg) and diethyl azodicarboxylate (0.19 mmol, 33 mg) in dry THF (1 mL) was added triphenylphosphine (0.19 mmol, 49 mg) in dry THF (1 mL). The mixture was heated in a microwave reactor at 130C for six min.. After cooling, the reaction mixture was purified by HPLC (95% 0. 1M ammonium acetate buffer: 5% CH3CN E 100% CH3CN) to give 14 mg (21%) of the title compound. IH NMR (400 MHz, CDCL3) 6 7.23 (bs, 1H), 7. 16-7. 06 (m, 3H), 7. 01-6. 96 (m, 2H), 6.63-6. 53 (m, 4H), 6. 03 (d, J=0.7 Hz, 1H), 4. 82 (s, 2H), 3.70 (S, 3H), 2.39 (d, J=0.7 Hz, 3H)., 35166-33-7

The synthetic route of 35166-33-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; WO2005/5417; (2005); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

59669-59-9, 3-(tert-Butyl)isoxazol-5-amine is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59669-59-9, Step 1: Synthesis of compound F-2. Trichloroethyl chloroformate (1.1 mL, 8.6mmol) is added to a mixture of 1 g (7.1 mmol) of compound F-l and 1.8 g (21.4 mmol) of sodium hydrogen carbonate in ethyl acetate/water (1/1, 20 mL) at room temperature. The resulting mixture is vigourously stirred for 3 d and then additional trichloroethyl chloroformate (1.1 mL, 8.6mmol) and sodium hydrogen carbonate (1.8 g, 21.4 mmol) are added. The mixture is stirred for a further 3 h. The aqueous layer is separated and extracted with ethyl acetate (2 x 25mL). The organic layers are combined, dried over MgS04, filtered and the filtrate isconcentrated under reduced pressure. The residue is purified by column chromatography (silica, eluent: ethyl acetate/heptanes) followed by trituration with heptanes to give 397 mg of compound F-2. Yield: 18percent; ES-MS: m/z 315 [M+H]; *H NMR (250 MHz,CHLOROFORM-if) delta ppm 1.33 (s, 9 H) 4.86 (s, 2 H) 6.11 (s, 1 H) 7.68 (br. s., 1 H)

The synthetic route of 59669-59-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; HICKEY, Eugene Richard; RIETHER, Doris; ERMANN, Monika; WO2012/12307; (2012); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

21080-81-9, Ethyl 5-cyclopropylisoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,21080-81-9

Into a 10-L round-bottom flask was placed ethyl 5-cyclopropylisoxazole-3- carboxylate (280 g, 1.55 mol, 1.00 equiv) and a solution of sodium hydroxide (74.3 g, 1.20 equiv) in water (4 L). The resulting solution was stirred for 1 h at room temperature. The resulting mixture was washed with ether. The pH value of the aqueous solution was adjusted to 2-3 with hydrochloric acid (12N). The resulting solution was extracted with ethyl acetate and the organic layers combined and concentrated under vacuum. This resulted in 220 g (93%>) of 5-cyclopropylisoxazole-3-carboxylic acid as an off- white solid. LCMS (method A, ESI): RT = 1.99 min, m/z = 153.9 [M+H]+. 1H-NMR (300 MHz CDCls): 8.42(brs, 1H), 6.37(s, 1H), 2.16-2.05(m, 1H), 1.29-1.12(m, 2H), 1.12-0.99(m, 2H) ppm.

21080-81-9 Ethyl 5-cyclopropylisoxazole-3-carboxylate 55251041, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; EPIZYME, INC.; CHESWORTH, Richard; FOLEY, Megan Alene Cloonan; KUNTZ, Kevin Wayne; MITCHELL, Lorna Helen; PETTER, Russell C.; SCHWARTZ, Carl Eric; (62 pag.)WO2016/40511; (2016); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

19788-37-5, 4-(Chloromethyl)-3,5-dimethylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of methyl 2-(4-hydroxyphenyl)acetate (3.0 g, 18.0 mmol) indimethylforrn amide (35 mL) was added potassium carbonate (3.7 g, 27.1 mmol), and the reaction mixture was stirred at rt for 30 min.4-(chloromethyl)-3, 5-dimethylisoxazole(2.62 g, 21.6 mmol) was then added and the resulting mixture was stirred at 80 C for 6 h. After completion of the reaction, water (30 mL) was added and the reaction mixture was extracted with ethyl acetate (2 x 50 mL). The organic layer was dried over Na2S04 and concentrated to obtain a crude product which was purified by silica gel column chromatography using (30% EtOAc/hexanes) to provide the title compound (3.3 g, 67%). U NMR (400 MHz, DMSO-d6) delta ppm 7.17-7.20 (d, 2 i n. 6.94-6.96 (d, 2 H), 4.88 (s, 2 H), 3.60 (USD, 3 H), 3.41 (s, 2 H), 2.39 (s, 3 H), 2.20 (s, 3 H). MS (ES1+) === 276.12 (M ¡¤ i l )., 19788-37-5

As the paragraph descriping shows that 19788-37-5 is playing an increasingly important role.

Reference£º
Patent; TEMPERO PHARMACEUTICALS, INC.; BALOGLU, Erkan; GHOSH, Shomir; LOBERA, Mercedes; SCHMIDT, Darby, R.; WO2013/19635; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

19788-37-5, 4-(Chloromethyl)-3,5-dimethylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 1c 1-((3,5-Dimethylisoxazol-4-yl)methyl)-1H-pyrazole-4-carboxylate Ethyl 1H-pyrazole-4-carboxylate (4.2 g, 30 mmol), 4-(chloromethyl)-3,5-dimethylisoxazole (5.1 g, 35 mmol), and cesium carbonate (9.8 g, 30 mmol), in DMF (50 mL), were stirred at 80 C. for 12 hours. The reaction was cooled to ambient temperature, diluted with 0.1 N HCl (150 mL) and extracted with ethyl acetate (3*, 75 mL). The combined organic extracts were dried over sodium sulfate and concentrated on the rotovap. The solid product was triturated with ethyl acetate/hexanes (1/9) and collected by filtration to afford ethyl 1-((3,5-dimethylisoxazol-4-yl)methyl)-1H-pyrazole-4-carboxylate (6 g, 80%) as a white solid. 1H NMR (CDCl3, 400 MHz): delta1.34 (t, J=7.2 Hz, 3H), 2.19 (s, 3H), 2.43 (s, 3H), 4.29 (q, J=7.2 Hz, 2H), 5.06 (s, 2H), 7.77 (s, 1H), 7.91 (s, 1H)., 19788-37-5

19788-37-5 4-(Chloromethyl)-3,5-dimethylisoxazole 88246, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; SENOMYX, INC.; PATRON, Andrew; TACHDJIAN, Catherine; SERVANT, Guy; DITSCHUN, Tanya; (257 pag.)US2016/376263; (2016); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

57684-71-6, 3-(Chloromethyl)isoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,57684-71-6

General procedure: To a solution of 4-chloro-lH-pyrrolo-[3,2-c]-pyridine [60290-21-3] (2.0 g, 13.1 mmol) dissolved in DMF (30.5 mL, 0.944 g/mL, 393.2 mmol) at 0C was added portionwise sodium hydride (1.1 g, 28.8 mmol). The reaction mixture was allowed to reach rt and stirred 45 min, after which it was re-cooled to 0C and l-bromobutane (2.1 mL, 1.27 g/mL, 19.7 mmol) was added dropwise. The mixture was then allowed to reach rt and stirred overnight. NaHC03 sat solution was added and the aqueous phase was extracted with EtOAc. The combined organic extracts were washed with water and brine, then dried over MgS04 and concentrated in vacuo. The crude residue was purified by column chromatography (silica gel; gradient Heptane/EtOAc from 100/0 to 50 /50) to yield 1-1 (2.7 g, 98.7%) as a yellow liquid

The synthetic route of 57684-71-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; BARTOLOME-NEBREDA, Jose Manuel; TRABANCO-SUAREZ, Andres, Avelino; TRESADERN, Gary John; MARTINEZ LAMENCA, Carolina; LEENAERTS, Joseph Elisabeth; OEHLRICH, Daniel; BUIJNSTERS, Peter Jacobus Johannes Antonius; VELTER, Adriana, Ingrid; VAN ROOSBROECK, Yves, Emiel, Maria; (171 pag.)WO2019/243535; (2019); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

51677-09-9,51677-09-9, Methyl 5-phenylisoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of substrate 1 (1.0 equiv) in THF (0.1 M) was added Grignardreagent (10 equiv) at -78 C and stirred at the same temperature under Ar. After the substrate 1 wasconsumed or the reaction did not proceed any more (judged by TLC), sat. NH4Cl aq. at -78 C was added tothe reaction mixtures and the resulting solution was extracted with AcOEt. The combined organic layerwas dried over Na2SO4 and concentrated in vacuo. The ratio of substrate 1, ketone 2, and tertiaryalcohol 3 was determined by 1H NMR spectrum of crude reaction mixtures.Tertiary alcohol 3ab-3db was prepared by the reaction of substrate 1 and Grignard reagent at rt.

The synthetic route of 51677-09-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Murai, Kenichi; Miyazaki, Shuji; Fujioka, Hiromichi; Tetrahedron Letters; vol. 53; 29; (2012); p. 3746 – 3749;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

0.172 g (1.00 mmole) of ethyl 5-hydroxymethyl-isoxazole-3-carboxylate and 0.33 ml (1.92 mmoles) of N,N-diisopropylethylamine are dissolved in 9 ml of 1,2-dichloroethane then cooled to 0 C. 0.184 g (0.91 mmole) of p-nitrophenyl chloroformate in solution in 2 ml of 1,2-dichloromethane are added. The mixture is stirred for 20 mins at ambient temperature, then 0.230 g (0.91 mmole) of 2-(4-chlorophenoxy)-7-aza-spiro[3.5]-nonane, obtained in stage 2.2, is added. The mixture is heated at 60 C. for 15 hrs. After return to ambient temperature, a 1N aqueous solution of caustic soda is added, and the product is extracted with dichloromethane. The combined organic phases are then successively washed three times with a 1N aqueous solution of caustic soda, twice with a saturated aqueous solution of ammonium chloride and once with a saturated aqueous solution of sodium chloride, dried over sodium sulphate, filtered and evaporated to dryness. 0.447 g of the expected product are obtained in the form of a colourless oil which is used as such in the following stage., 123770-62-7

The synthetic route of 123770-62-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SANOFI; US2012/129830; (2012); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

2510-36-3, 3,5-Dimethylisoxasole-4-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of lithium bis(trimethylsilyl)amide (10 g, 60 mmol, 3 eq) in toluene (60 mL) was added drop wise during 15 min to a solution of 3,5-dimethylisoxazole-4-carboxylic acid (2.82 g, 20 mmol) and methyl benzoate (2.5 mL, 1 eq) in THF (20 mL) at a temperature not exceeding 40 deg. After 1 h the reaction was quenched by the addition of a water solution of 0.1M HCl (0.3 L) leaving the water phase still basic and the phases was separated. The water phase was washed with toluene and then reduced in volume by evaporation until most of the residual organic solvents were removed. 1M HCl was added dropwise with stirring. The resulting crystals were filtered and dried in vacuum to yield the title compound. 1H NMR (400 MHz, CHLOROFORM-D) delta ppm 2.45 (s, 3H) 4.75 (s, 2H) 7.43-7.51 (m, 2H) 7.55-7.63 (m, 1H) 7.86-8.12 (m, 2H), 2510-36-3

As the paragraph descriping shows that 2510-36-3 is playing an increasingly important role.

Reference£º
Patent; Amgen Inc.; Biovitrum AB; US2008/21022; (2008); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

1750-42-1, Isoxazol-3-amine is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of compounds 1a-1e or methyl 4-aminobenzoate (1.0 mmol) in pyridine (3.0 mL), the corresponding sulfonyl chloride (1.3 mmol) in pyridine (3.0 mL)were added dropwise under nitrogen atmosphere at 0 C, then the reaction mixture was stirred at room temperature overnight. The reaction was then acidified to pH=1 with 4NHCl(aq) and the resulting solid was collected by filtration. The crude product was purified by flash column chromatography (ethyl acetate-petroleum ether = 1:2) to give the title compounds 2a-2i., 1750-42-1

Big data shows that 1750-42-1 is playing an increasingly important role.

Reference£º
Article; Zhang, Jiankang; Shen, Luqing; Wang, Jincheng; Luo, Peihua; Hu, Yongzhou; Medicinal Chemistry; vol. 10; 1; (2014); p. 38 – 45;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem