Category: 123770-62-7

123770-62-7, Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate (prepared according to WO2010/142801, p. 147, 0.093 g) was dissolved in dichloromethane (5 ml) and 1,1′-carbonyldimidazole (0.089 g) was added. The reaction mixture was stirred for 2 h at room temperature before (2E,4E)-7-butoxyhepta-2,4-dien-1-amine hydrochloride (0.120 g) and triethylamine (0.076 ml) were added. The reaction mixture was warmed to 40C and stirred overnight after which it was cooled to room temperature and washed with water. The organic layer was collected and evaporated in vacuo. The crude product was purified via flash column chromatography to yield the product as a white solid

123770-62-7, The synthetic route of 123770-62-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Dr. August Wolff GmbH & Co. KG Arzneimittel; Soeberdt, Michael; Knie, Ulrich; Abels, Christoph; EP2666766; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

123770-62-7, Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Production Example 107 (0749) 60% Sodium hydride (1.04 g, 26.0 mmol) was added to dehydrated N,N-dimethylformamide (10 ml) cooled to 0C, under a nitrogen atmosphere, and a dehydrated N,N-dimethylformamide (10 ml) solution of ethyl 5-hydroxymethylisoxazole-3-carboxylate (3.0 g, 17.54 mmol) was added dropwise thereto, and then the mixture was further stirred for 30 minutes. A dehydrated N,N-dimethylformamide (5 ml) solution of 1-bromo-4-phenylbutane (3.73 g, 17.54 mmol) was added thereto, and the mixture was heated to room temperature and stirred for 16 hours. Then, the mixture was added to a saturated aqueous ammonium chloride solution, and extracted twice with ethyl acetate. The organic layer was washed with water and saturated saline water, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure. The residue was applied to a silica gel column chromatography to obtain 1.65 g of ethyl 5-(4-phenylbutoxymethyl)isoxazole-3-carboxylate represented by the following formula. 1H-NMR (CDCl3, TMS, delta (ppm)) : 7.27 (m, 2H), 7. 17 (m, 3H), 6.65 (s, 1H), 4.60 (s, 2H), 4.45(q, 2H), 3.53(t, 2H), 2.63 (t, 2H), 1.68 (m, 4H), 1.46(t, 3H)

123770-62-7, The synthetic route of 123770-62-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sumitomo Chemical Company, Limited; MITSUDERA, Hiromasa; AWASAGUCHI, Kenichiro; AWANO, Tomotsugu; UJIHARA, Kazuya; EP2952096; (2015); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

Step A – (5-Hydroxymethyl-isoxazol-3-yl)-diphenyl-methanol; A solution of triethylamine (69 ml_) in ether (31 mL) was added slowly over 4 h with the aid of a syringe pump to a briskly stirred solution of propargyl alcohol (37.5 mL) and ethyl 2-chloro-2-(hydroxyimino)acetate (75 g) in ether (500 mL) at room temperature. The reaction mixture was then allowed to stir overnight, filtered and the filtrate washed with water (twice). The aqueous phases were combined, saturated with sodium chloride and re-extracted with ethyl acetate (twice). The combined organic phases were dried (MgSO4), filtered and evaporated in vacuo to give a thick oil (82 g) comprised mainly of delta-hydroxymethyl-isoxazole-S-carboxylic acid ethyl ester. This was dissolved in THF (700 mL), cooled to -10DC and treated with a solution of phenylmagnesium chloride (750 mL, 2.0 M in THF) keeping the temperature below -2C. The reaction mixture was warmed to room temperature and stirred for 1 h. The reaction mixture was poured carefully into ice-cold concentrated hydrochloric acid (200 mL) and ice (500 mL) and the layers separated. The aqueous layer was extracted with ether. The combined organic layers were washed with brine, dried, filtered and evaporated in vacuo. Trituration with ether gave (5- hydroxymethyl-isoxazol-3-yl)-diphenyl-methanol (82.3 g, 59% (2 steps)) as a white solid. 1H NMR (300 MHz, DMSO): delta 7.39-7.25 (m, 10 H), 6.82 (s, 1 H), 6.34 (s, 1 H), 5.62 (t, J = 6.0 Hz, 1 H), 4.54 (d, J = 6.0 Hz, 2 H)., 123770-62-7

As the paragraph descriping shows that 123770-62-7 is playing an increasingly important role.

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; ASTRAZENECA AB; NADIN, Alan, John; OSBOURN, Susan, Elizabeth; TISSELLI, Patrizia; RAY, Nicholas, Charles; WO2010/18352; (2010); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

123770-62-7, Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate (50 mg, 0.29 mmol) in MeCN (2 mL) was added triphenylphosphine (153 mg, 0.58 mmol), 2,6-lutidine (31 .3 mg, 0.034 mL, 0.29 mmol) and CBr4(194 mg, 0.58 mmol). The reaction mixture was stirred at room temperature for 1 .5 hours. The mixture is concentrated and purified directly by flash chromatography with heptane:ethyl acetate = 1 :0 to 0:1 to give ethyl 5- (bromomethyl)isoxazole-3-carboxylate (68 mg).

123770-62-7, As the paragraph descriping shows that 123770-62-7 is playing an increasingly important role.

Reference£º
Patent; H. LUNDBECK A/S; KEHLER, Jan; JUHL, Karsten; MARIGO, Mauro; VITAL, Paulo, Jorge, Vieira; JESSING, Mikkel; LANGGARD, Morten; RASMUSSEN, Lars, Kyhn; CLEMENTSON, Carl, Martin, Sebastian; (270 pag.)WO2018/7249; (2018); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate (0.270 g) was dissolved in absolute ethanol (4.5 ml). Methylamine (2M in THF, 3.16 ml) was added. The vial was sealed and stirred at 70C overnight. The reaction mixture was cooled to room temperature and the solvent was evaporated in vacuo. The crude product was purified via flash column chromatography (1-4% methanol in dichloromethane) affording the product as a white solid, 123770-62-7

123770-62-7 Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate 8027233, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; Dr. August Wolff GmbH & Co. KG Arzneimittel; Soeberdt, Michael; Knie, Ulrich; Abels, Christoph; EP2666766; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

0.172 g (1.00 mmole) of ethyl 5-hydroxymethyl-isoxazole-3-carboxylate and 0.33 ml (1.92 mmoles) of N,N-diisopropylethylamine are dissolved in 9 ml of 1,2-dichloroethane then cooled to 0 C. 0.184 g (0.91 mmole) of p-nitrophenyl chloroformate in solution in 2 ml of 1,2-dichloromethane are added. The mixture is stirred for 20 mins at ambient temperature, then 0.230 g (0.91 mmole) of 2-(4-chlorophenoxy)-7-aza-spiro[3.5]-nonane, obtained in stage 2.2, is added. The mixture is heated at 60 C. for 15 hrs. After return to ambient temperature, a 1N aqueous solution of caustic soda is added, and the product is extracted with dichloromethane. The combined organic phases are then successively washed three times with a 1N aqueous solution of caustic soda, twice with a saturated aqueous solution of ammonium chloride and once with a saturated aqueous solution of sodium chloride, dried over sodium sulphate, filtered and evaporated to dryness. 0.447 g of the expected product are obtained in the form of a colourless oil which is used as such in the following stage., 123770-62-7

The synthetic route of 123770-62-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SANOFI; US2012/129830; (2012); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate (50 mg, 0.29 mmol) in MeCN (2 mL) was added triphenylphosphine (153 mg, 0.58 mmol), 2,6-lutidine (31.3 mg, 0.034 mL, 0.29 mmol) and CBr4 (194 mg, 0.58 mmol). The reaction mixture was stirred at room temperature for 1.5 hours. The mixture is concentrated and purified directly by flash chromatography with heptane:ethyl acetate = 1:0 to 0:1 to give ethyl 5-(bromomethyl)isoxazole-3-carboxylate (68 mg)., 123770-62-7

The synthetic route of 123770-62-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; H. LUNDBECK A/S; KEHLER, Jan; JUHL, Karsten; MARIGO, Mauro; VITAL, Paulo, Jorge, Vieira; JESSING, Mikkel; LANGGARD, Morten; RASMUSSEN, Lars, Kyhn; CLEMENTSON, Carl, Martin, Sebastian; (278 pag.)WO2019/115567; (2019); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

123770-62-7, Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Production Example 208 (0851) Ethyl 5-hydroxymethylisoxazole-3-carboxylate (1.71 g, 10.0 mmol) was dissolved in tetrahydrofuran (50 mL), and 3,5-difluorobenzyl bromide (2.48 g, 12.0 mmol) and 18-crown-6 (0.26 g, 1.0 mmol) were added thereto. Sodium hydride (60% oil-based) (0.80 g, 20.0 mmol) was slowly added thereto at room temperature, and the mixture was stirred at room temperature overnight. Then, dilute hydrochloric acid was added thereto, and the mixture was extracted three times with ethyl acetate. The organic layer was washed with saturated saline water, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure. The residue was dissolved in ethanol (20 mL), and an aqueous solution obtained by dissolving potassium hydroxide (2.81 g, 50 mmol) in water (10 mL) was added thereto at room temperature, and then the mixture was stirred at 80C for 3 hours. Water was added to the reaction mixture, and the mixture was concentrated under reduced pressure. Tert-butyl methyl ether was added to the concentrate, and the aqueous layer was fractionated. Dilute hydrochloric acid was added to the resulting aqueous layer, and the mixture was extracted three times with ethyl acetate. The organic layer was washed with saturated saline water, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure to obtain 1.38 g of 5-(3,5-difluorobenzyloxymethyl)isoxazole-3-carboxylic acid represented by the following formula. The product was subjected to a next reaction without purification., 123770-62-7

As the paragraph descriping shows that 123770-62-7 is playing an increasingly important role.

Reference£º
Patent; Sumitomo Chemical Company, Limited; MITSUDERA, Hiromasa; AWASAGUCHI, Kenichiro; AWANO, Tomotsugu; UJIHARA, Kazuya; EP2952096; (2015); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

123770-62-7, Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 376 ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate (50.0 mg, 0.29 mmol) in 311 DCM (2 mL) was added 378 diethylaminosulfur trifluoride (70.6 mg, 0.06 ml, 0.44 mmol). The mixture was stirred at 40 C. for 1 hour. 55 Water (3 mL) was added and the mixture was extracted with ethyl acetate (5 mL¡Á3). The combined organic layers were washed with brine (5 mL), dried over Na2SO4 and concentrated. The crude mixture was purified by flash chromatography with heptane:ethyl acetate=1:0 to 0:1 to give 379 ethyl 5-(fluoromethyl)isoxazole-3-carboxylate (41.0 mg).

123770-62-7, As the paragraph descriping shows that 123770-62-7 is playing an increasingly important role.

Reference£º
Patent; H. Lundbeck A/S; Juhl, Karsten; Jessing, Mikkel; Langgard, Morten; Vital, Paulo Jorge Vieira; Kehler, Jan; Rasmussen, Lars Kyhn; Clementson, Carl Martin Sebastian; Marigo, Mauro; (154 pag.)US2019/194189; (2019); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123770-62-7,Ethyl 5-(hydroxymethyl)isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

Reference Production Example 105 (0747) 60% Sodium hydride (1.04 g, 26.0 mmol) was added to dehydrated N,N-dimethylformamide (10 ml) cooled to 0C, under a nitrogen atmosphere, and a dehydrated N,N-dimethylformamide (10 ml) solution of ethyl 5-hydroxymethylisoxazole-3-carboxylate (3.0 g, 17.54 mmol) was added dropwise thereto, and then the mixture was further stirred for 30 minutes. A dehydrated N,N-dimethylformamide (5 ml) solution of 1-bromo-3-phenylpropane (3.5 g, 17.54 mmol) was added thereto, and the mixture was heated to room temperature and stirred for 16 hours. Then, the mixture was added to a saturated aqueous ammonium chloride solution, and extracted twice with ethyl acetate. The organic layer was washed with water and saturated saline water, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure. The residue was applied to a silica gel column chromatography to obtain 1.9 g of ethyl 5-(3-phenylpropoxymethyl)isoxazole-3-carboxylate represented by the following formula. 1H-NMR (CDCl3, TMS, delta (ppm)) : 7.30-7.25 (m, 2H), 7.20-7.15 (m, 3H), 6.65 (s, 1H), 4.61 (s, 2H), 4.40 (q, 2H), 3.53(t, 2H), 2.70 (t, 2H), 1.98-1.88(m, 2H), 1.42 (t, 3H), 123770-62-7

As the paragraph descriping shows that 123770-62-7 is playing an increasingly important role.

Reference£º
Patent; Sumitomo Chemical Company, Limited; MITSUDERA, Hiromasa; AWASAGUCHI, Kenichiro; AWANO, Tomotsugu; UJIHARA, Kazuya; EP2952096; (2015); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem