Analyzing the synthesis route of 108655-63-6

The synthetic route of 108655-63-6 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.108655-63-6,3-(Trifluoromethyl)isoxazol-5-amine,as a common compound, the synthetic route is as follows.

To a solution of 3-(trifluoromethyl)isoxazol-5-amine (0.77 g) in DMF (10 mL) is added NaH (60% oil disp.). The resulting mixture is stirred for 20 min and then 4-ethoxy-1-isothiocyanato-2-nitrobenzene (see Dyson, G. M.; George, H. J.; Hunter, R. F. J. Chem. Soc. 1927, 436-445) (0.22 g) is added. The resulting mixture is stirred for 30 min, concentrated to dryness, taken-up in EtOAc, washed with brine, and purified utilizing preparatory HPLC. Yield 9%. HRMS (EI) calcd for C13H11F3N4O4S 376.0453, found 376.0450., 108655-63-6

The synthetic route of 108655-63-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Piotrowski, David W.; Rogers, Bruce N.; McWhorter JR., William W.; Walker, Daniel Patrick; Corbett, Jeffrey W.; Groppi JR., Vincent E.; Rudmann, Daniel G.; US2003/236287; (2003); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Simple exploration of 1202769-66-1

1202769-66-1 2-(5-Methylisoxazol-3-yl)but-3-yn-2-ol 58221759, aIsoxazoles compound, is more and more widely used in various.

1202769-66-1, 2-(5-Methylisoxazol-3-yl)but-3-yn-2-ol is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 2-Synthesis of 4-[1-(2-aminopyrimidin-4-yl)-2-(oxan-4-yloxy)-1H-1,3-benzodiazol-6-yl]-2-(5-methyl-1,2-oxazol-3-yl)but-3-yn-2-ol A mixture of 4-[6-bromo-2-(oxan-4-yloxy)-1H-1,3-benzodiazol-1-yl]pyrimidin-2-amine (150 mg, 0.27 mmol, 70%), 2-(5-methyl-1,2-oxazol-3-yl)but-3-yn-2-ol (200 mg, 1.32 mmol), bis(triphenylphosphine)palladium(II) dichloride (220 mg, 0.31 mmol) and triethylamine (1 mL) in dimethylsulfoxide (2 mL) was stirred under nitrogen atmosphere for 5 hr at 70 C. The reaction mixture was cooled to room temperature then filtered through a frit filter to remove the catalyst. The filtrate was purified by preparative HPLC to give 30 mg (24%) of 4-[1-(2-aminopyrimidin-4-yl)-2-(oxan-4-yloxy)-1H-1,3-benzodiazol-6-yl]-2-(5-methyl-1,2-oxazol-3-yl)but-3-yn-2-ol as a white solid. 1H NMR (400 MHz, DMSO) delta 8.41 (d, J=5.6 Hz, 1H), 8.15 (s, 1H), 7.46 (d, J=8.0 Hz, 1H), 7.28-7.07 (m, 1H), 7.08 (s, 2H), 6.99 (d, J=5.6 Hz, 1H), 6.46 (s, 1H), 6.37 (s, 1H), 5.39-5.35 (m, 1H), 3.88-3.82 (m, 2H), 3.06-3.55 (m, 2H), 2.51 (s, 3H), 2.24-2.16 (m, 2H), 1.88-1.82 (m, 5H); LC-MS: m/z=+461 (M+H)+., 1202769-66-1

1202769-66-1 2-(5-Methylisoxazol-3-yl)but-3-yn-2-ol 58221759, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; Genentech, Inc.; US2012/214762; (2012); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

New learning discoveries about 36958-61-9

36958-61-9, As the paragraph descriping shows that 36958-61-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36958-61-9,5-(Bromomethyl)-3-methylisoxazole,as a common compound, the synthetic route is as follows.

tert-Butyl 2-[4-(5-chloro-2-fluorophenyl)-5-methoxy-2-oxopyridin-1(2H)-yl]-3-(3-methyl-1,2-oxazol-5-yl)propanoate (Racemate) To a solution of 900 mg (2.45 mmol) of tert-butyl [4-(5-chloro-2-fluorophenyl)-5-methoxy-2-oxopyridin-1(2H)-yl]acetate in 18 ml of tetrahydrofuran under argon at -78 C. were added dropwise 3.06 ml (1.0 M in THF, 1.25 eq.) of lithium bis(trimethylsilyl)amide, and the mixture was stirred for 30 min. Subsequently, 635 mg (3.43 mmol, 1.4 eq.) of 5-(bromomethyl)-3-methyl-1,2-oxazole were added. The resulting reaction mixture was stirred at -78 C. for another 30 min and at RT for another 90 min. Saturated aqueous ammonium chloride solution was added to the reaction mixture. After phase separation, the aqueous phase was extracted with ethyl acetate. The combined organic phases were washed with saturated aqueous sodium chloride solution. The organic phase was dried (sodium sulphate), filtered and concentrated under reduced pressure. The crude product was then purified by means of normal phase chromatography (eluent: cyclohexane/ethyl acetate (0-38%) mixtures). Yield: 1.00 g (88% of theory) LC/MS [Method 1]: Rt=1.10 min; MS (ESIpos): m/z=463 (M+H)+, 1H-NMR (400 MHz, DMSO-d6): delta [ppm]=7.54 (ddd, 1H), 7.48 (dd, 1H), 7.35 (t, 1H), 7.31 (s, 1H), 6.43 (s, 1H), 6.13 (s, 1H), 5.35 (dd, 1H), 3.68-3.56 (m, 2H), 3.55 (s, 3H), 2.16 (s, 3H), 1.40 (m, 9H).

36958-61-9, As the paragraph descriping shows that 36958-61-9 is playing an increasingly important role.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; ROeHRIG, Susanne; JIMENEZ NUNEZ, Eloisa; SCHLEMMER, Karl-Heinz; TERSTEEGEN, Adrian; TELLER, Henrik; HILLISCH, Alexander; HEITMEIER, Stefan; SCHMIDT, Martina Victoria; STAMPFUss, Jan; (82 pag.)US2017/298052; (2017); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Simple exploration of 3356-89-6

3356-89-6 5-Chloro-3-phenylisoxazole 326080, aIsoxazoles compound, is more and more widely used in various.

3356-89-6, 5-Chloro-3-phenylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred suspension of NaH (60% in mineral oil, 440 mg, 11 mmol, prewashed with hexane) in anhydrous THF (20 mL) was added the appropriate alcohol (15 mmol) at r.t. and the reaction mixture was stirred for 0.5 h. Next, 5-chloro-3-phenylisoxazole (2) (1.0 g, 5.6mmol) was introduced as a solid and the mixture was refluxed for 1 h. After cooling to r.t., the mixture was quenched with H2O (20 mL). For 4a and 4b, the resulting precipitate was collected, washed with H2O and recrystallized from hexane-Et2O mixture. For 3a, the reaction mixture was extracted with CH2Cl2 (3 ¡Á 20 mL). The combined organic layers were dried (Na2SO4) and concentrated in vacuo to give isoxazole 3a. 5-tert-Butoxy-3-phenylisoxazole (4c) was synthesized analogously using commercially available potassium tert-butoxide., 3356-89-6

3356-89-6 5-Chloro-3-phenylisoxazole 326080, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Article; Rostovskii, Nikolai V.; Agafonova, Anastasiya V.; Smetanin, Ilia A.; Novikov, Mikhail S.; Khlebnikov, Alexander F.; Ruvinskaya, Julia O.; Starova, Galina L.; Synthesis; vol. 49; 19; (2017); p. 4478 – 4488;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Downstream synthetic route of 4369-55-5

As the paragraph descriping shows that 4369-55-5 is playing an increasingly important role.

4369-55-5, 5-Amino-3-phenylisoxazole is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4369-55-5

A mixture of (R)-2-(5-bromo-6-cyanopyridin-3-ylamino)-4-methylpentanamide (80mg, 0.257 mmol), 5-amino-3-phenylisoxazole (44 mg, 0.275 mmol), NaOPh trihydrate (55 mg,0.323 mmol), xantphos (30 mg, 0.051 mmol) and Pd2dba3 (18 mg, 0.019 mmol) in dioxane (2mL) was degassed with Ar, then was stirred at 110 ¡ãC for 20 h. HOAc (0.1 mL) was added. The mixture was concentrated in vacuo. The residue was purified by HPLC to give (R)-2-(6-cyano-5-(3-phenylisoxazol-5-ylamino)pyridin-3-ylamino)-4-methylpentanamide (15 mg).

As the paragraph descriping shows that 4369-55-5 is playing an increasingly important role.

Reference£º
Patent; PORTOLA PHARMACEUTICALS, INC.; SONG, Yonghong; XU, Qing; SRAN, Arvinder; BAUER, Shawn M.; JIA, Zhaozhong J.; KANE, Brian; PANDEY, Anjali; WO2013/192046; (2013); A2;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Simple exploration of 62348-13-4

62348-13-4 Isoxazole-5-carbonyl chloride 2736707, aIsoxazoles compound, is more and more widely used in various.

62348-13-4, Isoxazole-5-carbonyl chloride is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

62348-13-4, Preparation of N-[4-(1-Hydroxy-1-methyl-2-{[(methylethyl)sulfonyl]amino}ethyl)phenyl]isoxazol-5-ylcarboxamide Scheme XII, Step A: Into a 100 mL single-neck flask, 159 mg of isoxazole-5-carbonyl chloride was added dropwise to 300 mg of [2-(4-aminophenyl)-2-hydroxypropyl][(methylethyl)sulfonyl]amine (prepared in example 19) and 122 mg of triethylamine in THF (35 mL) while stirring under a nitrogen atmosphere at room temperature. The reaction was allowed to stir at this temperature for 2 h. The mixture was then poured into H2O and the desired product was extracted into ethyl acetate. The organic layer was backwashed once with H2O, dried over K2CO3, and concentrated under reduced vacuum to yield 416 mg as a solid. This material was purified via recrystallization from ethyl acetate/hexane 1:1 to yield intermediate title compound (207 mg, 51%) as a white solid. Ion spray M.S. 366.1 (M*-1). Calculated for C16 H21 N3 O5 S

62348-13-4 Isoxazole-5-carbonyl chloride 2736707, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; Eli Lilly and Company; US7034045; (2006); B1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Some tips on 59669-59-9

59669-59-9 3-(tert-Butyl)isoxazol-5-amine 2095694, aIsoxazoles compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59669-59-9,3-(tert-Butyl)isoxazol-5-amine,as a common compound, the synthetic route is as follows.,59669-59-9

To a solution of the starting pyrazole amine (1 eq) in EtOAc were added 2,2,2-trichloroethylchloroformate (1.1 eq) and saturated NaHCO3 (2-3 eq) at 0¡ã C. After stirring for 3 h at RT, the layers were separated and the aqueous layer extracted with EtOAc. The combined organic extracts were washed with brine, dried (Na2SO4) and concentrated under vacuum to yield the crude TROC carbamate of the pyrazole amine.Example 2To a solution of 2,2,2-trichloroethyl 3-tert-butylisoxazol-5-ylcarbamate (0.080 g, 0.25 mmol), formed via General method B from Example B1, in dioxane (3 mL) was added Example A2 (70 mg, 0.25 mmol) and 1-methylpyrrolidine (22 mg, 0.25 mmol). The reaction mixture was heated overnight at 65¡ã C. The reaction mixture cooled to RT, concentrated in vacuo, DCM (2 mL) was added and the slurry was stirred for 1 hour. The solid was filtered and air dried to obtain 1-(4-(2-(1H-1,2,4-triazol-1-yl)pyridin-4-yloxy)-2-fluorophenyl)-3-(3-tert-butylisoxazol-5-yl)urea. 1H NMR (400 MHz, DMSO-d6): delta 10.3 (s, 1H), 9.56 (s, 1H), 8.70 (s, 1H), 8.34 (s, 1H), 8.29 (d, J=6.0 Hz, 1H), 8.03 (t, J=9.2 Hz, 1H), 7.68 (dd, J=2.0, and 5.6 Hz, 1H), 7.57 (d, J=1.2 Hz, 1H), 7.26 (dd, J=2.8, and 12.0 Hz, 1H), 7.03 (m, 1H), 6.05 (s, 1H), 1.24 (s, 9H); MS (ESI) m/z: 438.1 (M+H+).

59669-59-9 3-(tert-Butyl)isoxazol-5-amine 2095694, aIsoxazoles compound, is more and more widely used in various.

Reference£º
Patent; Deciphera Pharmaceuticals, LLC; US2008/261961; (2008); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Analyzing the synthesis route of 2510-36-3

The synthetic route of 2510-36-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2510-36-3,3,5-Dimethylisoxasole-4-carboxylic acid,as a common compound, the synthetic route is as follows.

Example 219 3,5-Dimethyl-isoxazole-4-carboxylic acid [4-chloro-5-(l-methyl-2-oxo-l,2,3,4- tetrahydro-quinolin-6-yl)-pyridin-3-ylmethyl]-amideTo a solution of 6-(5-aminomethyl-4-chloro-pyridin-3-yl)-l-methyl-3,4-dihydro-lH- quinolin-2-one hydrochloride (example 218, 0.05 g, 0.148 mmol) in dry DMF (1 mL) were added EDCI (0.034 g, 0.077 mmol), hydroxybenzotriazole (0.017 g, 0.077 mmol), Hunig’s base (0.057 g, 0.443 mmol) and 3,5-dimethyl-isoxazole-4-carboxylic acid (0.021 g, 0.148 mmol) and the resulting solution was stirred at room temperature for 2h. The reaction mixture was diluted with EtOAc, poured into sat. NaHC03 solution (10 mL) and extracted with EtOAc (2 x 20 mL). Combined organics were dried over Na2S04, filtered and evaporated to dryness. The residue was purified by silica gel flash chromatography eluting with a 0 to 5% MeOH-DCM gradient to give the title compound (0.03 g, 48 %) as a colorless solid. MS: 425.4 (M+H+)., 2510-36-3

The synthetic route of 2510-36-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; AEBI, Johannes; AMREIN, Kurt; HORNSPERGER, Benoit; KNUST, Henner; KUHN, Bernd; LIU, Yongfu; MAERKI, Hans P.; MAYWEG, Alexander V.; MOHR, Peter; TAN, Xuefei; ZHOU, Mingwei; WO2013/37779; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

Brief introduction of 108511-97-3

The synthetic route of 108511-97-3 has been constantly updated, and we look forward to future research findings.

108511-97-3, Isoxazol-4-amine is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 4-aminoisoxazole (2.00 g, 23.79 mmol; CASNo. 108511-97-3) in THF (50 mL) at 0 0C was added pyridine (1.92 mL, 23.79 mmol,) followed by phenyl chloroformate (3.28 mL, 26.17 mmol,). After stirring at 0 0C for 2.5 h, the reaction was warmed to room temp overnight. The reaction was diluted with ethyl acetate and washed with 2M HCI1 water, saturated sodium bicarbonate, and brine. The organic layer was dried over magnesium sulfate, filtered, concentrated, and purified by flash chromatography40 (dichloromethane/hexane) to give the title compound as a white solid (2.07 g, 10.15 mmol, 50%)., 108511-97-3

The synthetic route of 108511-97-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PFIZER INC.; WO2009/127944; (2009); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

New learning discoveries about 3405-77-4

As the paragraph descriping shows that 3405-77-4 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3405-77-4,5-Methylisoxazole-3-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To the appropriate acid derivative 7, (Jackson et al., 2012) 10 (0.021 mol) in 20 ml of THF, 3.6 g of N,N’-carbonyldiimidazol (CDI) was slowly added under stirring. After addition was complete, the solution was first magnetically stirred for 30 min at room temperature and then heated to 60 ¡ãC for 1 h. The reaction mixture was cooled to room temperature and treated with 2.3 g of MgCl2 and 4.5 g of ethyl potassium malonate. After stirring (r.t.) for 3 h 15 ml of water followed by 5 ml of HCl 6 N was added. The mixture was then concentrated under reduced pressure, and the obtained white solid was collected by filtration, washed with water, and dried. Spectroscopical and physical data of compound 11a are in accordance with those reported in the literature (Takagi et al., 2008)., 3405-77-4

As the paragraph descriping shows that 3405-77-4 is playing an increasingly important role.

Reference£º
Article; Cascioferro, Stella; Maggio, Benedetta; Raffa, Demetrio; Raimondi, Maria Valeria; Cusimano, Maria Grazia; Schillaci, Domenico; Manachini, Barbara; Leonchiks, Ainars; Daidone, Giuseppe; Medicinal Chemistry Research; vol. 25; 5; (2016); p. 870 – 878;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem