Category: Isoxazoles

91182-60-4,91182-60-4, 5-(4-Bromophenyl)-3-methylisoxazole-4-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 2: [5-(4-Bromo-phenyl)-3-methyl-isoxazol-4-yl]-carbamic acid (R)-1-phenyl-ethyl ester5-(4-Bromo-phenyl)-3-methyl-isoxazole-4-carboxylic acid (25 g, 88.7 mmol) in toluene (500 mL) was added triethylamine (18.5 mL, 133 mmol), followed by diphenylphosphoryl azide (22.1 mL, 101.9 mmol). (R)-(+)-1-Phenylethyl alcohol (11.9 mL, 97.5 mmol) was added, and the reaction was stirred at 75 C. for 2 hours. The mixture was partitioned between EtOAc and H2O and filtered through Celite. The aqueous layer was extracted with EtOAc, and the combined organic layers were dried over MgSO4, filtered, and concentrated to give the title compound.

91182-60-4 5-(4-Bromophenyl)-3-methylisoxazole-4-carboxylic acid 56604559, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; AMIRA PHARMACEUTICALS, INC.; US2010/152257; (2010); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13999-39-8,3-Amino-4,5-dimethylisoxazole,as a common compound, the synthetic route is as follows.

A solution of 4,5-dimethylisoxazol-3-amine (4.9 g, 44 mmol, 1.0 equiv; CASNo. 13999-39-8, Org. Proc. Res. Dev. 2007, 11, 275-277) and triethylamine (6.4 mL, 46 mmol, 1.05 equiv) in acetonitrile (25 mL) was added portionwise to a 0 0C solution of phenyl chloroformate (5.8 mL, 46 mmol, 1.05 equiv) in THF (100 mL). After stirring at 0 0C for 1 h, the reaction was warmed to room temp overnight. The reaction was concentrated to about one-half the volume and partitioned between ethyl acetate and saturated sodium 20 bicarbonate. The organic layer was washed with brine, dried over sodium sulfate, filtered, concentrated, and purified by flash chromatography (20 to 40% ethyl acetate/heptane) to give the title compound as a white solid (8.39 g, 83%). m/z 233 (MH+). 1H NMR (400 MHz, DMSO-d6) delta ppm 10.67 (br. s., 1 H), 7.40 (t, J=8.0 Hz, 2 H), 7.17 – 7.27 (m, 3 H)1 2.12 (s, 3 H), 1.82 (s, 3 H)., 13999-39-8

As the paragraph descriping shows that 13999-39-8 is playing an increasingly important role.

Reference£º
Patent; PFIZER INC.; WO2009/127944; (2009); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1136-45-4,5-Methyl-3-phenylisoxazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.

Example 1; 3-(5-Methyl-3-phenyl-isoxazol-4-yl)-imidazo[l,5-a]pyridinea) S-Methyl-S-phenyl-isoxazole-phicarboxyric acid (pyridin-2-ylmethyl)-amide A mixture of 5-methyl-3-phenyl-isoxazole-4-carboxylic acid (4.06 g, 20 mmol, commercially available) and thionyl chloride (5 mL) was heated under reflux for 3 h. Evaporation of all volatiles afforded 5-methyl-3-phenyl-isoxazole-4-carboxylic acid chloride (4.4 g, 93%) as yellow oil, which was used without further purification in the next reaction. To a mixture of an aqueous solution of 2-picolylamine (0.182 g, 1.68 mmol) in water (2 mL) and ethyl acetate (4 mL) were added sodium hydrogen carbonate (362 mg, 4.2 mmol) in one portion. Then 5-methyl-3-phenyl-isoxazole-4-carboxylic acid chloride (0.31 g, 1.4 mmol) in ethyl acetate (2 mL) was added dropwise with vigorous stirring under ice-bath cooling keeping the temperature at 0 0C. After addition, the reaction mixture was stirred at room temperature for 18 h. The resulting solution was then diluted with ethyl acetate. The organic layer was separated, and the aqueous layer was extracted with ethyl acetate. The combined extracts were then washed with brine, dried over sodium sulphate, and concentrated to afford the title compound (0.38 g, 93%) as a white solid. MS: m/e: 294.1 [M+H]+.

1136-45-4, 1136-45-4 5-Methyl-3-phenylisoxazole-4-carboxylic acid 14343, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2007/74089; (2007); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.62348-13-4,Isoxazole-5-carbonyl chloride,as a common compound, the synthetic route is as follows.,62348-13-4

General procedure: Example 6B (0.2 g, 0.556 mmol) was dissolved in dichloromethane (2.7 ml) and pyridine (0.3 ml) and was treated dropwise with a solution of 3-methylbutanoyl chloride (0.102 ml, 0.835 mmol) in dichloromethane (0.5 ml). The reaction mixture was stirred at 25 C for 2 hours, concentrated, and purified using reverse phase HPLC (Phenomenex Luna C8(2) 5 um IotaOmicronthetaAlpha AXIA column (30mm x 75mm) run with a gradient of acetonitrile (A) and 0.1% trifluoroacetic acid in water (B), at a flow rate of 50mL/min (0-0.5 min 10% A, 0.5-7.0 min linear gradient 10-95% A, 7.0- 10.0 min 95% A, 10.0-12.0 min linear gradient 95- 10% A) to afford the title compound.

The synthetic route of 62348-13-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ABBVIE INC.; SWEIS, Ramzi F.; CURTIN, Michael L.; PLIUSHCHEV, Marina A.; HANSEN, Todd M.; LONGENECKER, Kenton; WO2013/170118; (2013); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

42831-50-5,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.42831-50-5,5-Methylisoxazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.

Thionylchloride (3.53 g, 0.0278 mol) was added to a solutionof 5-Methylisoxazole-4-carboxylic acid (2.7 g, 0.0185 mol) in anhydrous dichloromethane (50 ml) with catalytic drops of DMF. The reaction was heated under reflux for 12 h then followed by removing the solvent under reduced pressure. DCM (20 ml) was added and evaporated 3 times to produce a brown oil that was used directly in the next step.

As the paragraph descriping shows that 42831-50-5 is playing an increasingly important role.

Reference£º
Article; Hamdi, Abdelrahman; Said, Eman; Farahat, Abdelbasset A.; El-Bialy, Serry A.A.; Massoud, Mohammed A.M.; Letters in drug design and discovery; vol. 13; 9; (2016); p. 912 – 920;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

59669-59-9,59669-59-9, 3-(tert-Butyl)isoxazol-5-amine is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

100 mg of 5-(2-fluoropyridin-4-yl)-2-(tetrahydropyran-4-yloxy)benzonitrile are suspended in 6 ml of dioxane in a 50 ml three-necked flask under N2, 52 mg of 3-tert-butylisoxazol-5-ylamine and 79 mg of KOtBu are added The yellow solution is stirred at 80¡ã C. for 2.5 h. For work-up, the reaction mixture is evaporated in a rotary evaporator, the residue is taken up in ethyl acetate and water and extracted. The collected organic phases are dried, filtered and evaporated. The crude product is purified by preparative HPLC, giving the desired product in 46percent yield; HPLC-MS Rt. [min] 2.556; HPLC-MS [M+H] 419; [0327] 1H NMR (500 MHz, DMSO-d6) delta [ppm] 8.36 (d, J=5.7, 1H), 8.19 (d, J=2.4, 1H), 8.04 (dd, J=8.9, 2.4, 1H), 7.53 (d, J=9.1, 1H), 7.42 (dd, J=5.8, 1.6, 1H), 7.38 (s, 1H), 5.00-4.88 (m, 1H), 3.96-3.85 (m, 2H), 3.64-3.50 (m, 2H), 2.12-2.00 (m, 2H), 1.79-1.66 (m, 2H), 1.38-1.24 (s, 9H).

59669-59-9 3-(tert-Butyl)isoxazol-5-amine 2095694, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; MERCK PATENT GMBH; Hoelzemann, Guenter; Dorsch, Dieter; Eggenweiler, Hans-Michael; US2014/228340; (2014); A1;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

53983-15-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53983-15-6,Ethyl 5-amino-4-phenylisoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

5.0 g (23 mmol) of ethyl phenylcyanopyruvate were reacted according to the method described in Chem. Ber. 107 (1974) 2794-2795 and Ber. Deutsch. Chem. Ges. 33 (1900) 2592-2595. Whereby there was obtained in 69.7% yield ethyl 5-amino-4-phenyl-3-isoxazolecarboxylate as beige crystals which melted at 119-121 after recrystallization from ethyl acetate/hexane. 2.9 g (12.5 mmol) of ethyl 5-amino-4-phenyl-3-isoxazolecarboxylate were heated to 110 for 2 hours under reduced pressure with 5.0 g (31.2 mmol) of t-butyl (2-aminoethyl)carbamate, whereby the ethanol formed was distilled off continuously. The cooled reaction mixture was dissolved in methylene chloride and chromatographed on 100 g of silica gel. Elution with methylene chloride which contains 5%. 10% and, respectively, 20% of ethyl acetate, combining of the pure fractions and evaporation yielded 1.9 g of crystals. Recrystallization from ethyl acetate/hexane yielded 1.5 g (34.7%) of t-butyl [2-(5-amino-4-phenyl-3-isoxazolecarboxamido)ethyl]carbamate as white crystals, melting point 144.

The synthetic route of 53983-15-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Hoffmann-La Roche Inc.; US5011849; (1991); A;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.108511-97-3,Isoxazol-4-amine,as a common compound, the synthetic route is as follows.

Dissolving 1-chloro-4-iodo-2-trifluoromethylbenzene (10 mmol) obtained in Reaction 1.220 ml of toluene,Isoxazole-4-amine is added sequentially to the system(12mmol),Palladium acetate (0.5 mmol),2,2′-bis(diphenylphosphino)-1,1′-binaphthyl(12 mmol), 3 ml of triethylamine, after stirring for 10 minutes, add 10 ml of cesium carbonate (10 mmol)The aqueous solution is heated to 50 C for 4 hours. After the reaction is completed, 20 ml of water is added to the system.Stir for 20 minutes, dispense,The organic phase is dried over anhydrous sodium sulfate. Concentrated, flash column chromatography,2.2 g of yellow N-(4-chloro-3-trifluoromethylphenyl)-isoxazole-4-amine powder was obtained with a yield of 84%.

108511-97-3, 108511-97-3 Isoxazol-4-amine 13804278, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; Zhang Ruwei; Ge Baoyin; Jing Fan; (7 pag.)CN108432776; (2018); A;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

3209-70-9, Ethyl isoxazole-3-carboxylate is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(a) 3-Hydroxymethyl isoxazole A solution of ethyl isoxazole-3-carboxylate (9.92 g, 70 mmol) in anhydrous ether (10 ml) was added dropwise to a stirred suspension of lithium aluminium hydride (2.67 g, 70 mmol) in ether (100 ml). The mixture was then refluxed until tlc indicated the reaction was complete (ca. 30 min) then the reaction was cautiously quenched with 2% sulphuric acid. The ether layer was separated, dried (MgSO4) and the solvent removed under reduced pressure to yield the 3-hydroxymethylisoxazole (4.23 g, 42.7 mmol, 61%); deltaH (CDCl3) 4.00 (1H, bs, OH), 4.70 (2H, s, CH2 –OH), 6.40 (1H, d, J 2 Hz, CH-4), 8.30 (1H, d, J 2 Hz, CH-5)., 3209-70-9

As the paragraph descriping shows that 3209-70-9 is playing an increasingly important role.

Reference£º
Patent; Beecham Group p.l.c.; US4812470; (1989); A;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem

42831-50-5,42831-50-5, 5-Methylisoxazole-4-carboxylic acid is a Isoxazoles compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(iv) 5-Methylisoxazol-4-yl carbonyl chloride Thionyl chloride (118 g) was added to 5-methylisoxazol-4-yl carboxylic acid (42 g) and stirred at room temperature as dimethylformamide (0.2 ml) was added. The solution was heated under reflux for 2 hours with stirring. Excess thionyl chloride was removed in vacuo at 50 C., then the residue was distilled through a 15 cm Vigreux column at reduced pressure to give an oil, b.p. 32-34 C./0.1 mmHg.

42831-50-5 5-Methylisoxazole-4-carboxylic acid 1425240, aIsoxazoles compound, is more and more widely used in various fields.

Reference£º
Patent; Lilly Industries Limited; US4983619; (1991); A;,
Isoxazole – Wikipedia
Isoxazole | C3H3NO – PubChem